What if I have a flat?

A: Normally, nothing. We have had many motorcycle users install Dyna Beads after plugging a tire using either a rope-type plug or a standard plug, and we have never had a single complaint.

With patches, it depends on the installation. If you have a flat and the tire repair service installs the newer patches that require the dealer to actually grind the inside surface, you will most likely not have a problem, as the patch is almost flush with the tire surface when properly applied.
We bly suggest that on a patch installation, that all excess glue is removed from around the patch area, and some talcum powder is sprinkled lightly over the area to attach itself to any glue left behind before installing the beads.